e3Power_cell testing

Kuvaus

Measurements were made in Battery Laboratory at Turku university of applied sciences. The cell measurements were done in weather chambers with different temperature settings. Measurement equipment was Chroma 17011 Battery cell tester. It has 24 channels with a maximum current of 100 A per channel. Channels can be connected in parallel to provide higher currents up to 1000 A. In each channel there is at least one temperature sensor. The measurement results have the following columns: - Step - Cycle - Loop (If there is more than 1 loop) - Step No. - Step Mode (for example CC Charge) - Step Dwell Time(ms) (time from the beginning of the step) - TEST TIME - Dwell Time (time from the beginning of the test) - Voltage (V) - Current (A) - Capacity (Ah) - Mode - Wh - Total Capacity (Ah) - Status - Temperature - Temperature (If there are 2 temperature sensors) Cell specifications Rated capacity 23 Ah Nominal voltage 2,3 V Maximum voltage 2,7 V Minimum voltage 1,5 V Maximum continuous current 100 A Maximum current 200 A (10 s) Operating temperature -30 °C … 55 °C
Näytä enemmän

Julkaisuvuosi

2022

Aineiston tyyppi

Tekijät

Open Science -team - Kuraattori

Amk, ICT

Jussi Hurri - Tekijä

Turku University of Applied Sciences - Julkaisija

Projekti

Muut tiedot

Tieteenalat

Sähkö-, automaatio- ja tietoliikennetekniikka, elektroniikka; Kone- ja valmistustekniikka; Materiaalitekniikka; Muu tekniikka

Kieli

englanti

Saatavuus

Avoin

Lisenssi

Creative Commons Nimeä 4.0 Kansainvälinen (CC BY 4.0)

Avainsanat

batteries, battery cells, discharges (electric), DPPC, Lithium-Ion LTO, thermal management, voltage

Asiasanat

Ajallinen kattavuus

undefined

Liittyvät aineistot